Technical Drawing

Show me a worked example on three uses of perspective drawing and distinguish it from isom

I am revising Perspective Drawing I for SS2 Technical Drawing. Test me on drawing a rectan

Quiz me on constructing the involute of a circle of 40 mm diameter for one complete revolu

Quiz me on drawing a slider-crank mechanism and plot the locus of the mid-point of the con

Quiz me on develop the lateral surface of a truncated cylinder, from the SS2 Technical Dra

Give me a wrong or muddled explanation of determine the lines of intersection of two regul

Be my SS2 Technical Drawing teacher for this one point: determine the lines of intersectio

Quiz me on develop the surfaces of the intersecting prisms and pyramids, showing the openi

Quiz me on applying the correct line types for outline, hidden detail, centre lines and co

Quiz me on drawing a second auxiliary elevation and a second auxiliary plan of a shaped bl

Quiz me on producing an oblique (cabinet) drawing of the same block with the depth drawn a

Quiz me on determine the true length of the same line by the auxiliary plane method, from

Quiz me on the classification of floors as solid or suspended, from the SS2 Technical Draw

Quiz me on straight-flight, quarter-turn, half-turn or dog-leg, and geometrical or spiral

Quiz me on assessed AO2, and roof types and members recur in WAEC and NECO, from the SS2 T

Give me a practice set on point equidistant from two fixed points for SS2 Technical Drawin

Give me a wrong or muddled explanation of constructing a hyperbola from given foci and a c

Act as my study partner. I will teach you constructing the involute of a square and of a r

Write a short SS2 Technical Drawing answer about clockwise and anticlockwise motion and ro

Show me how building a working card model of a simple four-bar linkage from strips works i