287 prompts matching "Quiz: 2. Identify hazards in the drawing studio"
Quiz: Drawing a slider-crank mechanism and plot the locus of the mid-point of the connecting rod
Quiz me on drawing a slider-crank mechanism and plot the locus of the mid-point of the con
Quiz: Producing an oblique (cabinet) drawing of the same block with the depth drawn at half scale
Quiz me on producing an oblique (cabinet) drawing of the same block with the depth drawn a
Quiz: Constructing the involute of a circle of 40 mm diameter for one complete revolution
Quiz me on constructing the involute of a circle of 40 mm diameter for one complete revolu
Quiz: Develop the lateral surface of a truncated cylinder
Quiz me on develop the lateral surface of a truncated cylinder, from the SS2 Technical Dra
Quiz: Develop the surfaces of the intersecting prisms and pyramids, showing the opening on each
Quiz me on develop the surfaces of the intersecting prisms and pyramids, showing the openi
Quiz: Applying the correct line types for outline, hidden detail, centre lines and construction lines
Quiz me on applying the correct line types for outline, hidden detail, centre lines and co
Quiz: Drawing a second auxiliary elevation and a second auxiliary plan of a shaped block
Quiz me on drawing a second auxiliary elevation and a second auxiliary plan of a shaped bl
Quiz: Determine the true length of the same line by the auxiliary plane method
Quiz me on determine the true length of the same line by the auxiliary plane method, from
Quiz: The parabola, hyperbola, involute and cycloid by the defining condition of each, compared
I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,
Teach me: Drawing the tangent and normal at a stated point on each curve
Be my SS2 Technical Drawing teacher for this one point: drawing the tangent and normal at
WAEC prep: Drawing the involute of a square of 30 mm side and measure the length of the final arc
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Let me explain: Graphic Products candidates meet the same content when drawing moving parts
I am going to explain graphic Products candidates meet the same content when drawing movin
Quiz: Determine the true shape of a right cone truncated at 45 degrees to the axis
I am revising True Shapes I for SS2 Technical Drawing. Test me on determine the true shape
Project task: Drawing the plan and elevation of a 60 mm diameter
Give me a practical task on drawing the plan and elevation of a 60 mm diameter from True S
WAEC prep: Drawing the true shape of the cut face of a square pyramid of 50 mm base truncated at 40
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Real-life Nigeria: Display the finished models beside the drawings
Show me how display the finished models beside the drawings works in real life in Nigeria.
Practice set: Your model against the drawing
Set me five practice tasks on your model against the drawing, at the level expected in SS2
Spot my mistake: Drawing the lines of intersection of two square prisms meeting at 90 degrees
Show me a worked example on drawing the lines of intersection of two square prisms meeting
Quiz: Drawing a rectangular block in one-point perspective from a given plan and elevation
I am revising Perspective Drawing I for SS2 Technical Drawing. Test me on drawing a rectan
Teach me: Drawing a stepped block in two-point perspective by the visual ray method from a given plan
I am an SS2 student studying Perspective Drawing II in Technical Drawing. Explain drawing