Technical Drawing

Quiz me on constructing the involute of a circle of 40 mm diameter for one complete revolu

Set me a quick recall test on drawing a circle in perspective by enclosing it in a square

Show me a worked example on constructing a cycloid generated by a 40 mm diameter circle ro

You are my personal SS2 Technical Drawing tutor. Teach me constructing an epicycloid and a

Set me a small project on generating circle into twelve equal parts, the kind I could fini

Take constructing an involute of a circle and a cycloid on one A3 sheet out of the textboo

Quiz me on drawing a slider-crank mechanism and plot the locus of the mid-point of the con

Quiz me on develop the lateral surface of a truncated cylinder, from the SS2 Technical Dra

Quiz me on develop the surfaces of the intersecting prisms and pyramids, showing the openi

Quiz me on applying the correct line types for outline, hidden detail, centre lines and co

Show me a worked example on drawing an isometric circle of 40 mm diameter by the four-cent

Quiz me on drawing a second auxiliary elevation and a second auxiliary plan of a shaped bl

Quiz me on producing an oblique (cabinet) drawing of the same block with the depth drawn a

Quiz me on determine the true length of the same line by the auxiliary plane method, from

Give me a practice set on card triangle in the two-plane model and turns it until the clas

Quiz me on the classification of floors as solid or suspended, from the SS2 Technical Draw

Quiz me on straight-flight, quarter-turn, half-turn or dog-leg, and geometrical or spiral

Quiz me on assessed AO2, and roof types and members recur in WAEC and NECO, from the SS2 T

I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,

Set me a quick recall test on constructing a parabola by the focus and directrix method fo