Technical Drawing

Set me a quick recall test on 2. Prepare a title block and border to standard proportions

Quiz me on 3. Plot the locus of a point on a simple crank-and-connecting-rod mechanism, fr

Be my SS1 Technical Drawing teacher for this one point: 1. Identify the types of pictorial

Quiz me on 2. Identify hazards in the drawing studio, from the SS1 Technical Drawing topic

Quiz me on 2. Define isometric drawing and the isometric axes at 30° to the horizontal, fr

Show me a worked example on 4. Construct a simple isometric drawing of a rectangular solid

I am an SS1 student studying Isometric Drawing III in Technical Drawing. Explain 1. Descri

Quiz me on 3. Construct an oblique drawing using the box method, from the SS1 Technical Dr

I am revising Drawing Materials and Equipment for SS1 Technical Drawing. Test me on 2. Dis

Show me a worked example on success: both drawings fully dimensioned with an error somewhe

Set me a quick recall test on 2. Demonstrate the use of shading to enhance an isometric dr

Act as my WAEC Technical Drawing examiner. I am in SS1. Set me an exam-standard question o

Set me a quick recall test on 3. Construct an arc touching one circle internally and enclo

I am an SS1 student studying Board Practice: Title Block and Lettering in Technical Drawin

Be my SS1 Technical Drawing teacher for this one point: 1. Demonstrate safe handling of th

Set me five practice tasks on success: assessed observation checklist passed on all five s

Quiz me on 4. Explain the geometric basis of each construction using bisectors, from the S

Quiz me on 2. Distinguish regular from irregular polygons, from the SS1 Technical Drawing

Quiz me on 2. Distinguish between enlargement by ratio of sides and by ratio of areas, fro

Quiz me on 3. Construct a square equal in area to a given rectangle, from the SS1 Technica