Technical Drawing

Show me a worked example on producing vertical and inclined lettering to consistent height

Show me a worked example on 4. Apply studio rules consistently and maintain instruments in

Let me talk you through 4. Construct common tangents to two equal and to two unequal circl

Set me five practice tasks on success: all ten circle parts correctly labelled and spacing

Give me a practical task on building a composite object in isometric from three orthograph

Let me talk you through 3. State the advantages of CADD over manual drawing from the Drawi

Show me a worked example on producing a sheet using at least five instruments correctly wi

Set me a quick recall test on 2. Prepare a title block and border to standard proportions

I am going to explain 3. Describe the purpose of lettering to you, as an SS1 Technical Dra

Show me a worked example on practise healthy habits with an error somewhere in it. Do not

Let me talk you through 3. Draw parallel and perpendicular lines using T-square and set sq

Show me a worked example on and produce all six line types at correct weight with an error

Set me a quick recall test on 2. Identify the types of angles: acute, right, obtuse, refle

I am going to explain 3. Construct the special angles 30°, 45°, 60°, 75°, 90°, 105° and 12

Show me a worked example on success: every constructed angle within ±1° when checked with

Show me a worked example on given two sides and the included angle with an error somewhere

Show me a worked example on success: all three constructions within 0.5 mm and ±1° of the

Let me talk you through 1. Describe a circle from the Circles and Triangles I topic. When

Set me a quick recall test on 4. Construct eccentric and concentric circles to given dimen

I am going to explain 1. Inscribe a circle in a given triangle to you, as an SS1 Technical