287 prompts matching "The hole basis and shaft basis systems"
Spot my mistake: Dimension a drawing using the aligned and the unidirectional system
Show me a worked example on dimension a drawing using the aligned and the unidirectional s
Teach me: Applying conventions for radii, diameters, holes, chamfers and repeated features
You are my personal SS2 Technical Drawing tutor. Teach me applying conventions for radii,
Teach me: Rotate the user coordinate system to produce an auxiliary elevation
You are my personal SS2 Technical Drawing tutor. Teach me rotate the user coordinate syste
Quiz: The parabola, hyperbola, involute and cycloid by the defining condition of each, compared
I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,
Teach me: Examined with the command words state, describe and explain
I am an SS2 student studying Loci and Special Curves in Technical Drawing. Explain examine
Quiz: Constructing a parabola by the focus and directrix method for an eccentricity of 1
Set me a quick recall test on constructing a parabola by the focus and directrix method fo
Teach me: Drawing the tangent and normal at a stated point on each curve
Be my SS2 Technical Drawing teacher for this one point: drawing the tangent and normal at
Practice set: Comparing the two curves and account for any difference
Give me a practice set on comparing the two curves and account for any difference for SS2
WAEC prep: The difference between the eccentricity of a parabola and that of a hyperbola
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Let me explain: Constructing the involute of a square and of a regular hexagon of 30 mm side
Act as my study partner. I will teach you constructing the involute of a square and of a r
WAEC prep: Drawing the involute of a square of 30 mm side and measure the length of the final arc
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Let me explain: The meaning of link, joint, crank, lever, slider and frame
Let me talk you through the meaning of link, joint, crank, lever, slider and frame from th
Quiz: Sketching freehand the mechanism of a pair of scissors
Set me a quick recall test on sketching freehand the mechanism of a pair of scissors at SS
Let me explain: Graphic Products candidates meet the same content when drawing moving parts
I am going to explain graphic Products candidates meet the same content when drawing movin
Quiz: Drawing a slider-crank mechanism and plot the locus of the mid-point of the connecting rod
Quiz me on drawing a slider-crank mechanism and plot the locus of the mid-point of the con
Project task: Drawing the plan and elevation of a 60 mm diameter
Give me a practical task on drawing the plan and elevation of a 60 mm diameter from True S
Real-life Nigeria: Measuring the major and minor axes of their ellipse
Show me how measuring the major and minor axes of their ellipse works in real life in Nige
Practice set: The four conic sections and the cutting plane that produces each
Set me five practice tasks on the four conic sections and the cutting plane that produces
Spot my mistake: Why the cut face appears as a straight line in one view and an ellipse in another
Show me a worked example on why the cut face appears as a straight line in one view and an
Real-life Nigeria: Swap sheets and mark each other's work against a three-point checklist
Take swap sheets and mark each other's work against a three-point checklist out of the tex