287 prompts matching "The types of quadrilaterals with their properties"
Project task: Set out the development of their Week 6 truncated cone on card
Give me a practical task on set out the development of their Week 6 truncated cone on card
Spot my mistake: Four line types used in orthographic drawing and the purpose of each
Show me a worked example on four line types used in orthographic drawing and the purpose o
Practice set: Comparing their auxiliary outline of the cone
Give me a practice set on comparing their auxiliary outline of the cone for SS2 Technical
Real-life Nigeria: Comparing the CAD auxiliary with their Week 8 board drawing
Take comparing the CAD auxiliary with their Week 8 board drawing out of the textbook. Desc
Let me explain: The focus-directrix property of the parabola
Let me talk you through the focus-directrix property of the parabola from the Loci and Spe
Real-life Nigeria: Measuring the major and minor axes of their ellipse
Show me how measuring the major and minor axes of their ellipse works in real life in Nige
Quiz: Producing an oblique (cabinet) drawing of the same block with the depth drawn at half scale
Quiz me on producing an oblique (cabinet) drawing of the same block with the depth drawn a
Real-life Nigeria: Lesson with the load path from roof to soil, drawing it as arrows on a board section
Take lesson with the load path from roof to soil, drawing it as arrows on a board section
WAEC prep: Why an arch is built with an odd number of voussoirs and a keystone at the crown
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Why the damp-proof course must be continuous with the damp-proof membrane under the floor
Show me a worked example on why the damp-proof course must be continuous with the damp-pro
WAEC prep: Four types of foundation
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Five types of door: panelled, flush, ledged and braced, louvred and sliding
You are my personal SS2 Technical Drawing tutor. Teach me five types of door: panelled, fl
Teach me: Drawing the plan of a hipped roof showing hips, valleys and the run of the common rafters
Be my SS2 Technical Drawing teacher for this one point: drawing the plan of a hipped roof
WAEC prep: Six roof types from given sketches
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Quiz: The parabola, hyperbola, involute and cycloid by the defining condition of each, compared
I am revising Loci and Special Curves for SS2 Technical Drawing. Test me on the parabola,
WAEC prep: The difference between the eccentricity of a parabola and that of a hyperbola
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Practice set: Lay a plastic gear or bicycle sprocket over their finished involute
Give me a practice set on lay a plastic gear or bicycle sprocket over their finished invol
WAEC prep: Drawing the involute of a square of 30 mm side and measure the length of the final arc
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: The motion at the needle of a treadle sewing machine when the treadle oscillates
Show me a worked example on the motion at the needle of a treadle sewing machine when the
Teach me: Plotting the locus of a stated point on the coupler of the four-bar chain
Be my SS2 Technical Drawing teacher for this one point: plotting the locus of a stated poi