224 prompts matching "Using a chain line where a hidden edge should be shown"
Quiz: Applying the correct line types for outline, hidden detail, centre lines and construction lines
Quiz me on applying the correct line types for outline, hidden detail, centre lines and co
Spot my mistake: Drawing the second auxiliary elevation of a shaped block and label both new ground lines
Show me a worked example on drawing the second auxiliary elevation of a shaped block and l
Practice set: Why layers, rather than a single drawing layer, are used for outline and hidden detail
Set me five practice tasks on why layers, rather than a single drawing layer, are used for
WAEC prep: The difference between the trace of a line and the trace of a plane
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Practice set: Why the curve becomes two straight lines when the two cylinders are of equal diameter
Set me five practice tasks on why the curve becomes two straight lines when the two cylind
WAEC prep: The difference between first and third angle projection in terms of where the plan is placed
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Project task: Roll a tin lid along a straight edge and plot
Give me a practical task on roll a tin lid along a straight edge and plot from Loci and Sp
Practice set: Cutting paper cylinder to show that the seam edge of the development is the stretch-out
Give me a practice set on cutting paper cylinder to show that the seam edge of the develop
Practice set: Vertical edges of both prisms and shows how each edge of the branch pierces two faces of the
Give me a practice set on vertical edges of both prisms and shows how each edge of the bra
Practice set: Measuring the inclined face on both the ordinary
Give me a practice set on measuring the inclined face on both the ordinary for SS2 Technic
Practice set: Comparing their auxiliary outline of the cone
Give me a practice set on comparing their auxiliary outline of the cone for SS2 Technical
Project task: LINE, OFFSET, TRIM and ELLIPSE commands on the projector
Give me a practical task on LINE, OFFSET, TRIM and ELLIPSE commands on the projector from
Practice set: Card triangle in the two-plane model and turns it until the class sees it edge-on
Give me a practice set on card triangle in the two-plane model and turns it until the clas
Let me explain: Constructing a parabola inside a given rectangle 100 mm by 60 mm by the intersecting-lines
I am going to explain constructing a parabola inside a given rectangle 100 mm by 60 mm by
WAEC prep: The difference between the eccentricity of a parabola and that of a hyperbola
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Spot my mistake: Constructing a cycloid generated by a 40 mm diameter circle rolling along a straight line
Show me a worked example on constructing a cycloid generated by a 40 mm diameter circle ro
Teach me: Plotting the locus of a stated point on the coupler of the four-bar chain
Be my SS2 Technical Drawing teacher for this one point: plotting the locus of a stated poi
Spot my mistake: Why the cut face appears as a straight line in one view and an ellipse in another
Show me a worked example on why the cut face appears as a straight line in one view and an
Let me explain: Determine the true shape of the cut face of a square pyramid truncated by an inclined plane
I am going to explain determine the true shape of the cut face of a square pyramid truncat
Practice set: Paper tube into a slot cut in a larger tube to show the saddle curve before the construction is
Give me a practice set on paper tube into a slot cut in a larger tube to show the saddle c