216 prompts matching "drawing instruments"
Teach me: Drawing the tangent and normal at a stated point on each curve
Be my SS2 Technical Drawing teacher for this one point: drawing the tangent and normal at
WAEC prep: Drawing the involute of a square of 30 mm side and measure the length of the final arc
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Let me explain: Graphic Products candidates meet the same content when drawing moving parts
I am going to explain graphic Products candidates meet the same content when drawing movin
Spot my mistake: Drawing a four-bar linkage to given link lengths and set out twelve crank positions
Give me a wrong or muddled explanation of drawing a four-bar linkage to given link lengths
Quiz: Drawing a slider-crank mechanism and plot the locus of the mid-point of the connecting rod
Quiz me on drawing a slider-crank mechanism and plot the locus of the mid-point of the con
Project task: Drawing the plan and elevation of a 60 mm diameter
Give me a practical task on drawing the plan and elevation of a 60 mm diameter from True S
Project task: Drawing a 40 mm side hexagonal prism 80 mm high truncated at 35 degrees
Set me a small project on drawing a 40 mm side hexagonal prism 80 mm high truncated at 35
WAEC prep: Drawing the true shape of the cut face of a square pyramid of 50 mm base truncated at 40
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Real-life Nigeria: Display the finished models beside the drawings
Show me how display the finished models beside the drawings works in real life in Nigeria.
Practice set: Your model against the drawing
Set me five practice tasks on your model against the drawing, at the level expected in SS2
Project task: Drawing two cylinders of 50 mm and 30 mm diameter meeting at 90 degrees
Set me a small project on drawing two cylinders of 50 mm and 30 mm diameter meeting at 90
Spot my mistake: Drawing the lines of intersection of two square prisms meeting at 90 degrees
Show me a worked example on drawing the lines of intersection of two square prisms meeting
Spot my mistake: Three uses of perspective drawing and distinguish it from isometric and oblique drawing
Show me a worked example on three uses of perspective drawing and distinguish it from isom
Quiz: Drawing a rectangular block in one-point perspective from a given plan and elevation
I am revising Perspective Drawing I for SS2 Technical Drawing. Test me on drawing a rectan
Teach me: Drawing a stepped block in two-point perspective by the visual ray method from a given plan
I am an SS2 student studying Perspective Drawing II in Technical Drawing. Explain drawing
Quiz: Drawing a circle in perspective by enclosing it in a square and plotting eight points
Set me a quick recall test on drawing a circle in perspective by enclosing it in a square
Real-life Nigeria: Visual ray method, drawing rays from the station point through each plan corner to the picture
Take visual ray method, drawing rays from the station point through each plan corner to th
Practice set: Drawing a stepped block in two-point perspective with vanishing points 300 mm apart
Set me five practice tasks on drawing a stepped block in two-point perspective with vanish
WAEC prep: Your rendered drawing
Act as my WAEC Technical Drawing examiner. I am in SS2. Set me an exam-standard question o
Teach me: Drawing the front elevation, plan and end elevation of a given shaped block in first angle
Be my SS2 Technical Drawing teacher for this one point: drawing the front elevation, plan